Electronics Forum | Fri Jun 30 09:49:05 EDT 2006 | bobpan
Did they take you into the real time computer and check the display live image ....to actually see if the quad align is good or not???? What types of errors are you getting???? Can you do a machine- calibration- quadalign and get a good reading????
Electronics Forum | Tue Mar 27 09:05:44 EDT 2007 | jerry
We lost the video processor module for the downward looking camera. twice in 6 months... We dont get 15 mil with quad but are looking for a machine that will. Jerry
Electronics Forum | Sat Aug 02 15:00:12 EDT 2008 | miroyu
I built aluminum cage add ground wire to it but my problem is not gone!Also , video is not in focus.How can I make it right.Does this shows that quadalign board is foulty? Any comments PLS? Thank you Miro
Electronics Forum | Mon Aug 04 08:02:39 EDT 2008 | leemeyer
Miro, The video has nothing to do with the Quadalign. On a good startup and with no nozzle installed run a "Function 30" and post numbers that you get on the handheld terminal. On a bad startup (nozzle in the down position) press the re button on t
Electronics Forum | Wed Jun 19 07:24:10 EDT 2013 | bobpan
Hello Rollon, There needs to be a contrast between the sticker and board. The manual gives and example of a round red sticker. If you still cant still make this work.....Do the following. Run the machine and after it finds fiducials press stop on the
Electronics Forum | Thu Nov 10 14:38:27 EST 2005 | Proy
Does anybody here have any information or experience with a DEK249 DEK ALIGN II system made by Cybernetics robotics? This system moves the table to align it to reference images. We are getting an old system working, it is mostly there, but we are ha
Electronics Forum | Fri Jun 13 08:00:57 EDT 2014 | sargeredarmy01
Haha, I can assure you sir I cannot see Russia from my house. Will admit that I do have some form of connection with the USAF. The error that comes up is a cycle alarm and a chuck set. I have attached a reference image of the machine screen. I als
Electronics Forum | Mon Nov 23 13:46:14 EST 2015 | dilogic
It is written on power-up screen after booting USOS (green letters). I am attaching image of mine, but with newer VME630 vision. If yours shows AIS3500 there, it is probably a problem with video DAC inside that box (located on the machine rear end, a
Electronics Forum | Sun Jan 20 17:55:49 EST 2013 | ngineer
Mikej, I'm only running a single image, just want to correct for the slight variations in how the board seats in the transport. It's not more than a few mils off, but enough to cause an issue on fine pitch parts. I don't have any image fiducial
Electronics Forum | Tue Oct 09 05:38:29 EDT 2018 | dfl
Hi, my Quad IV-c is showing a really dark image on the camera and its VERY difficult to see the components pads to make the adjusts. I already check the monitor brightness (at maximum and I can see the crosshair, so the monitor is good) and already
